|
|
Post by Haines Garage on Apr 7, 2014 18:18:22 GMT -5
I soaked in parts cleaner, for a week , my L134 Oil Pick Up assembly.   Note these tabs, they have to be GENTLY! Pried loose.  Like this..  Here is what you will find inside!!!  Pull straight out the screen you can with your pinky...(Sir Moose, Your Thumb   )  My Screen has holes in it...IT IS JUNK!!!!!! Don't argue, it is!  This is the crud I scraped out. Note the rope style "gasket" that goes between the two halves  So, Soaking does you no good my friends, you have to take it apart...That's What Haines Does |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 7, 2014 18:53:20 GMT -5
Well that's about as straight foreward as it gets, lots of $h!t in there  , and the pinky deal......LMAO Lee |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 7, 2014 19:16:36 GMT -5
VERY IMFORMATIVE HG  ,,
YOURS WASNT SITTING FOR YEARS EITHER I PRESUME....I WILL TAKE A FEW PHOTOS OF WHAT WE PULL OUT OF SOME OIL PANS AT THE SHOP BEFORE THE ENGINES GO IN FOR A STEAM BATH..YOU WOULDNT BELIEVE IT...
|
|
|
|
Post by Haines Garage on Apr 7, 2014 19:39:30 GMT -5
I would believe, Have cleaned many an oil pan as well. For those of you who like #s and markings...best pic I could get.  |
|
|
|
Post by Haines Garage on Apr 7, 2014 19:41:11 GMT -5
Anyone recognize?  Think Chain Drive! |
|
|
|
Post by zooke581 on Apr 7, 2014 21:21:25 GMT -5
Don't see and "F" mark. MB?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 7, 2014 21:24:58 GMT -5
I will add, the Bypass type oil filter is worthless, if all that crap let go its headed right for the bearings, and maybe 10% to the filter. MHO Lee |
|
|
|
Post by Haines Garage on Apr 7, 2014 21:46:28 GMT -5
I will add, the Bypass type oil filter is worthless, if all that crap let go its headed right for the bearings, and maybe 10% to the filter. MHO Lee This is going to get interesting..its the small things that do. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 7, 2014 22:18:22 GMT -5
Good job! I found the same thing a few years ago, let it soak, think its nice, clean, and ready to use.......then take it apart..........oops!
|
|
|
|
Post by Haines Garage on Apr 7, 2014 23:03:48 GMT -5
Don't see and "F" mark. MB? Give that man a Cigar! Actually VEC CJ2A motor, I believe it to be an MB engine, although some Gurus might want to argue. Look those floats up on the G503. |
|
|
|
Post by athawk11 on Apr 8, 2014 12:11:01 GMT -5
That's icky!
|
|
|
|
Post by Haines Garage on Apr 8, 2014 14:35:17 GMT -5
Ummmmmmmmmm...did you just say "Icky" ?? |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 19, 2014 6:53:10 GMT -5
The coolest is when you find the oil dip stick baffle in the pan. You can weld it back on. Funny how few of them are still on the sticks. John
|
|
)
, and the pinky deal......LMAO
