Need Some Pics If You Have Them

[Haines Garage]

I am looking for a kind soul to hopefully post some photos here on a couple of things.

#1 The Brake Master Cylinder Assembly , with the correct placement of the support bracket. BOLTS ARE IMPORTANT

#2 The complete Clutch and Brake Pedal Assembly

The photos on the web, and drawings from the parts manual are vague..

And why do they never show "Correct Fasteners" HMMMMMMMMM

[Deleted]

Unfortunately, this is really the only decent picture, but I don't think it really shows you what you want. Maybe I'll crawl under a real jeep later and text you a pic...



Bo!

[Deleted]

hillbillystoys.phanfare.com/5175805#imageID=131633233


hillbillystoys.phanfare.com/5175805#imageID=131633237

hillbillystoys.phanfare.com/5175805#imageID=131633233

ISNT A 2A BUT ITS A M38..SAME SET UP TO GIVE YOU AN IDEA....

[Deleted]

Scott, there are two master cylinders so identify which your jeep had. One uses through bolts and the holes in the master are not threaded, and the earlier type the front hole is threaded for a shorter bolt to thread into the master cylinder body. ( I think it's the front) Check out what you removed. John