|
|
Post by Haines Garage on Mar 19, 2016 23:13:42 GMT -5
|
|
|
|
Post by Haines Garage on Mar 20, 2016 21:10:01 GMT -5
|
|
|
|
Post by Ryan_M on Mar 21, 2016 9:55:20 GMT -5
Aww...c'mon! That tail light would have given me a matched set on my red 3A!! There's another $4 down the toilet.
|
|
|
|
Post by jeffwho on Mar 21, 2016 11:33:54 GMT -5
That sombit's gonna have chrome rims, slammed to the ground in lowrider style and be painted with Coors Light colours - All silver with one blue and one red fender. I can just see it now...
|
|
|
|
Post by Haines Garage on Mar 21, 2016 20:03:13 GMT -5
|
|
|
|
Post by zooke581 on Mar 21, 2016 21:12:41 GMT -5
I thought HG was going with hydraulics on it?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 21, 2016 22:18:38 GMT -5
Better be welding the rear panel back in so it floats!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 22, 2016 7:55:07 GMT -5
That might be his next invasion attempt...paddling up the Ashley River.
|
|
|
|
Post by jeffwho on Mar 22, 2016 9:56:04 GMT -5
Might want to keep those air shocks intact to counter for the inevitable plethora of brass fittings you're so fond of installing .. what eras will this trailer represent?
You could put 416 fenders on it! AND I should have held on to those handles I cut off ... sorry, my bad.
|
|
|
|
Post by Haines Garage on Mar 22, 2016 19:41:06 GMT -5
|
|
|
|
Post by zooke581 on Mar 22, 2016 21:14:08 GMT -5
Since you used a sledgomatic on the light I though for sure you'd use a wrecking ball to get the tub off the frame!  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 22, 2016 21:45:07 GMT -5
That might be his next invasion attempt...paddling up the Ashley River. Paddling!, your kidding, right!........... We live in modern times, paddling is for natives of third world countries, outboard motors work exceptionally well on a "Wilhelm Float", I run a Mercury 25 hp, but really a 10 hp unit is all that's needed........ I'm thinking the canal by HG's place must flow to the Cooper, our armada could power down the Cooper to the confluence of the Ashley, then up the Ashley, perhaps I should chart a coarse, epic adventure.   |
|
|
|
Post by Haines Garage on Mar 23, 2016 6:07:52 GMT -5
Since you used a sledgomatic on the light I though for sure you'd use a wrecking ball to get the tub off the frame! Ahhhh my friend , the tub is still on the frame.... I have to cut the inside welds. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 23, 2016 6:39:23 GMT -5
Inside welds.  |
|
|
|
Post by Haines Garage on Mar 23, 2016 9:02:28 GMT -5
Tub is welded on the inside of the frame as well.  |
|
|
|
Post by jeffwho on Mar 23, 2016 9:08:26 GMT -5
You never know what Bubba T. Bubba added. Good luck - whew, lucky all I had to cut off was handles!
|
|
|
|
Post by Haines Garage on Mar 23, 2016 19:11:20 GMT -5
Now seeing there are Corksuckers out there that doubt my abilities , or the people that I am connected with, I know you saw the post on the weld spots...
Now just go ahead and say you where wrong, take back your middle finger, and put it you know where.
Admit it!!! You went out and looked under one of your trailers and said ....
"Oh Shizz, he's right!!!"
|
|
|
|
Post by Haines Garage on Mar 23, 2016 19:12:44 GMT -5
You never know what Bubba T. Bubba added. Good luck - whew, lucky all I had to cut off was handles! And you... You big movie star.... Your going on Schillers List! |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 23, 2016 20:35:35 GMT -5
Tub is welded on the inside of the frame as well. Mercy, the bastages up in Penns woods sure diddint want that tub to fall off!  |
|
|
|
Post by Ryan_M on Mar 27, 2016 15:24:51 GMT -5
I am currently gazing out the window at my "one of these days" Bantam projects and this welding diagram just all but killed off whatever motivation I had for it. I had figured "...aw, a dozen or so welds to cut through....". Holy cow.  |
|
|
|
Post by Haines Garage on Mar 27, 2016 15:40:24 GMT -5
I have about half of them cut. With the Holliday weekend, I didn't have any trailer time. I am going to take all parts to a sandblaster. I am not going to do this one in the backyard. My backyard sandblasting days are done. I think anyways it will be cost effective. Buy the time I buy all the media, time, etc. I would be just as easy to pay someone this time around.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 27, 2016 16:21:39 GMT -5
I did this, too, Ryan on the Goat Coach. It was for the tub that I had no intentions on saving and that was still a PITA!
|
|
|
|
Post by Haines Garage on Apr 2, 2016 22:02:01 GMT -5
Day 4-5
|
|
|
|
Post by Haines Garage on Apr 5, 2016 21:12:45 GMT -5
|
|
|
|
Post by Haines Garage on Apr 12, 2016 19:50:07 GMT -5
Here we go again...  |
|
